garage roller shutter motor

1. long use life 2. strong material 3. special heat treatment on gears 4. for heavy garage doors

Features

1.It is installed without springs, so it is easy to be maintained, and it is installed in the same way as the traditional rolling door, so it is easy to install.

2.The clutch adopts the handle-like design which is same to the joystick, so it is easy to change the electric mode to manual mode, then the rolling door can also be rolled up.

3.Its speed is faster than the traditional motor, so it is applicable to the garage gate which has a higher requirements on speed. its load is higher than the high speed motor with springs, so it is applicable to the heavier doors, and it can be more effient for burglarproof .

4. The fan is installed on the top with a good performance of heat dissipation,

so there is no heating problem for the higher switching frequency of garage door

5. Products with 1/2 HP and 1 HP are available for order.

The technical parameter of 1HP and 1/2 HP MOTOR

type	Roller tube	Lift capacity(kg)	Gear	power	remark
1/2HP	4” (inches)	462	Motor gear / bracket gear 10T / 42T 3/4” gear	400W	1.The lift capacity exclude the weight of roller tube 2.The torque of reducer 1HP 36rpm 1/2 HP 34 rpm 3.the current capacity for three phase 1/2 HP can’t be over 1.5A 1HP can’t be over 3.4A (60HZ/220V) 4.the current capacity for three phase 1/2 HP can’t be over 1.5A 1HP can’t be over 3.4A (60HZ/380V)
	5” (inches)	395
	6” (inches)	346
1/2HP	4” (inches)	352	Motor gear / bracket gear 10T / 32T 3/4” gear	400W
	5” (inches)	300
	6” (inches)	265
1HP	4” (inches)	892	Motor gear / bracket gear 10T / 42T 3/4” gear	750W
	5” (inches)	763
	6” (inches)	668
	8” (inches)	450
	10” (inches)	230
1HP	4” (inches)	680	Motor gear / bracket gear 10T / 32T 3/4” gear	750W
	5” (inches)	582
	6” (inches)	510
	8” (inches)	340
	10” (inches)	170

garage roller shutter motor